Woodstock, AL

Estimate to pull and reset toilet and replace wax ring. If the flange is busted then the price will need to go up to replace the flange. We will need to run a snake down the laundry drain to make sure there is no build up in line. Sold membership Fixed toilet to where it is not rocking anymore. Also ran snake down laundry to get rid of smell.

I talked with customer explain to him three options that we can do but the interest company it is on the middle between customer and ProServices entrance company say that they can’t find somebody else to do the work for $3000 For And you for all new update services, including material and labor.

Cut out water leak Basic repair on water line Install new expansion tank Performance and safety testing

Customer stated system was not working properly Ran extensive diagnostic Compressor and reversing valve working correctly Amp checked strips pulling 50amps (correct) Checked blower and working properly System working properly on departure Heat pumps have tendency to not heat as comfortably when outside temp is below 28 degrees Recommend disabling eco mode on thermostat Leaving temp set to comfortable temp and leaving

quote for re-routing water and drain lines

I was called to repair an HVAC system for heating in Woodstock, AL. The system, a Trane XR95, was not producing heat due to a faulty igniter. I replaced the igniter with a new Trane OEM part and also inspected the heat exchanger for cracks. After replacing the part, I tested the system, ensuring it was running efficiently and heating the home properly. The furnace is now back in good working condition just in time for the colder weather.

I repaired a leaking toilet in Woodstock, AL, caused by a worn-out fill valve. I replaced the old fill valve with a Fluidmaster 400A and adjusted the water level to ensure proper flushing. After testing for leaks and making sure the toilet was refilling properly, I also checked the water supply line for any issues. The toilet is now working efficiently, with no leaks or issues.

I repaired a Bradford White 50-gallon gas water heater that had been intermittently shutting off. Upon inspection, I discovered that the gas control valve was malfunctioning, causing the pilot light to extinguish. I replaced the faulty gas control valve and relit the pilot. I also checked the thermostat and ensured the temperature was set correctly. After the repairs, I monitored the system for an extended period, confirming it remained operational without shutting down. The customer now has consistent hot water, and the system is running efficiently.

Cleared a clogged and backed-up shower drain using a RIDGID K-45 drain cleaner with a 5/16" x 25' cable. Removed hair, soap scum, and other debris causing the blockage. After clearing the drain, thoroughly flushed the line to ensure smooth water flow. Inspected the P-trap and drainpipe for any additional obstructions or damage. Regular drain maintenance is essential for preventing clogs and maintaining efficient plumbing. For professional drain cleaning services, contact us to keep your system running smoothly.

I was called to replace a shower valve that was leaking in the wall in Woodstock, Alabama. Upon arrival, I found that the shower valve was leaking from the handle. I removed the old valve and replaced it with a new one, ensuring a tight seal. I also replaced the shower arm and shower head to ensure proper functionality. I tested the valve to ensure it was working properly before leaving the job site.