Bessemer, AL

Waterline replacement for a customer that has an old brittle pvc water line that kept leaking. Customer was happy and has good warranty

I recently completed a job repairing a water leak on the main water line in Mccalla. The water line had been leaking for several weeks, causing damage to the surrounding area and putting the homeowner’s safety at risk.
Upon arrival, I immediately assessed the situation and determined the source of the leak. The leak was located at a joint connection, where the pipe had corroded and worn away, allowing water to seep through.

To repair the leak, I first cut out the damaged section of pipe using a specialized saw. Next, I installed a new joint coupling and securely tightened it to prevent future leaks.

To ensure the leak was completely sealed, I backfilled the area with gravel and compacted it to create a solid foundation. I then tested the repaired section of pipe to ensure no water was leaking.

After completing the repairs, I thoroughly cleaned up the work area, ensuring no debris or tools were left behind.

The homeowner was extremely pleased with the quality of the repairs and the

Air conditioning repair service. Customer had compressor out. Replaced back capacitor and unit is back up and running. Customer is happy

Emergency sewer line unstop we were able to clear the clog and get the customer flushing right away. We used our specialized tools and techniques to locate the blockage and clear it quickly and efficiently. The customer was very pleased with our prompt and professional service, and we were able to restore their sewer system to working order.

I recently completed a job where I used my expertise to clear a kitchen sink line that had become clogged. To do this, I ran a sewer machine and jetted the line to break up any debris or clogs that were causing the problem. This allowed the water to flow freely again, solving the customer’s plumbing issue.

Performed septic tank pumping for a customer experiencing household backups. Utilized a high-powered vacuum truck to extract sludge and wastewater from the septic tank. Conducted a thorough inspection to ensure proper removal of accumulated solids. Prevented further backups by restoring the septic system’s capacity to efficiently process waste. The customer expressed satisfaction with the service provided, resolving their issue and restoring normal functioning to their household plumbing.

I recently replaced a leaking 50-gallon gas water heater for a customer of our HVAC contractor company. The first step was to turn off the gas supply to the water heater and disconnect the water supply line. Then, I removed the old water heater and disposed of it properly. Next, I installed the new gas water heater and connected it to the gas supply and water supply lines. I tested the water heater to ensure it was working properly and adjusted the gas pressure as needed. Finally, I vented the water heater to the outside and made sure it was properly insulated.

I recently completed a septic tank pumping and repair job for a customer .. The customer had been experiencing issues with their septic tank, such as slow drainage and a strong odor, and called us for a solution.

Upon arrival, our team inspected the septic tank and determined that it was heavily clogged with solid waste and sludge. To clear the blockage, we used specialized equipment, such as a high-pressure water jetter, to break up and remove the waste material.

In addition to clearing the blockage, we also made a few repairs to the septic tank system. We replaced a damaged drain field tile and installed a new filter to prevent future clogs.

After completing the job, the customer was pleased with the results. The septic tank was functioning properly again, and the customer reported no more issues with slow drainage or a strong odor.

Overall, this septic tank pumping and repair job was a success, and the customer was happy with the work we performed.

I recently completed a job repairing an HVAC system. The customer had reported that their unit was not producing enough heat. After performing a thorough inspection, I determined that the unit needed a boost of Freon. I accessed the system’s refrigerant lines and added more Freon to the system. This simple repair resolved the customer’s heating issue and restored their unit to optimal performance.

I recently completed an AC repair job for a customer. After performing a thorough inspection, I discovered that the condenser was the root cause of the issue. I promptly fixed the problem and got the customer’s AC system back up and running smoothly.